Click image to view full size image
Stainless Steel Powder for 3D Printing-Additive Manufacturing
The powder won a very good use effect on metal printer made by Renishaw. We believe that the multidimensional metal manufacturing has great potential for development in the future. We have been cooperating with several scientific research institutions and set up the project team.
The recommended material: 316L, 304L and 430L
The recommended particle size: 40-15μm
| Product Characteristics | ||||||||
| 1 Low oxygen level 2 Good mechanical properties 3 The morphology of the surface is smooth, nearly spherical | ||||||||
| Chemical Compositions | ||||||||
| C | O | Si | Mn | Ni | Cr | Mo | Fe | |
| 316L | ≤0.03 | ≤0.3 | ≤1.00 | ≤0.3 | 12.0-15.0 | 16.0-18.0 | 2.0-3.0 | Bal. |
| 304L | ≤0.03 | ≤0.3 | ≤1.00 | ≤0.3 | 9.0～13.0 | 18.0-20.0 | - | Bal. |
| 430L | ≤0.03 | ≤0.3 | ≤1.00 | ≤0.3 | -- | 16.0-18.0 | - | Bal. |
Stainless Steel Powder for 3D Printing Additive Manufacturing
